1998 Tripp 41
Yacht price :
Great opportunity to own Bill Tripp designed 41 that is a fast race boat that can win races and also have the ability to cruise. This boat has been fully rennovated and modified to achive the full Cruiser Racer level. Perfect boat for Bermuda or racing local.
Boat was build by Holby Marine with all the best materials and all the go fast ideas.
- Annapolis, MD, US
- Available for sale in U.S. waters:
- Vessel Name:
- ex Morning Glory
- Boat Type:
- Hull Material:
- Hull Type:
- Hull Color:
- Flag of Registry:
Dimensions & Weight
- 41 ft - 12.5 meter
- Dry Weight:
- Draft - max:
- 7 ft 10 in - 2.39 meter
- Draft - min:
- Bridge Clearance:
DECK, CABIN TOP & SIDES AND COCKPIT
Every piece of deck hardware including chainplates and stanchion bases removed in advance of all surfaces being filled with epoxy filler then primed and painted using Alexseal Yacht Coatings. Deck and cockpit horizontal surfaces sprayed with nonskid grit. All hardware reinstalled and bedded more often with new SS fasteners. 2008
DECK-Starting from bow
2-Schaffer SS removable cleat sockets model
Stbd socket used for forward SS bolt for mounting of removable semi-custom SS extended anchor roller.
Port Socket used for forward ring for removable Seldin retracting aluminum sprit for A symmetric cruising spinnaker
Sockets can also be used tomountSchaffermodel removable cleats for double mooring lines, etc.
Adjacent to original equipment custom SS removable cleat
Stbd side-2 through deck plastic fittings for mounting bolts for aft end of removable anchor roller. Bolts accessible through anchor locker hatch.
Port side-Witchard clip for mounting inboard end of Seldin sprit when in extended position
Aft of bow cleat-Anchor locker-self draining
MID FORE DECK
Port side-Witchard clip for securing inboard end of Seldin sprit in retracted position.
Main Deck Hatch-Lewmar model replaced 2005
Head Hatch-Lewmar model replaced 2005
New Hatch-adjacent to head hatch on stbd side-Lewmar model new 2008
Ventillation hatches (2) added port & stbd outboard of center line halyards-Lewmar model 2008
Custom 5’SS grab rails (2) added port & stbd-2008
Harken Cheek blocks (2)-new, port and stbd-added to lead vang control lines around new hatches-2008
Harken #57 Cheek blocks (2) repositioned as fairleads for checkstay control lines-2008
Spinlock Halyard stoppers (2) repositioned to accommodated checkstay control lines-2008
New Lexan replacement windows (4) installed in cabin top sides -2008
SIDE DECKS-MID & AFT
Harken #75 Cheek blocks with locking cams for mainsheet added port and stbd with new angled wedge blocks. Upgraded blocks allow mainsheet to be locked-off freeing up mainsheet winches to be used for trimming changing sheet for headsail changes or to used for docking lines. Fast release pins added to keep cams locked in open position until needed. 2008
Lifeline boarding gates added port and stbd . Additional SS support legs added to existing stanchions to take fore/aft strain. SS Pelican hooks and fittings swedged to lifelines. 2008
Schaffer removable cleat sockets model and removable cleats model added port and stbd. Area below deck greatly reinforced to accommodate backing plates. Cleats removed for racing. Can be moved to bow sockets if needed. 2008
SS chafe strips and aft and outboard of new aft cleats port and stbd. 2008
Aft SS pushpits port and stbd. SS bolts welded to center leg to permit proper through bolting of pushpits. 2008
Installed 2 new Lewmar ports model . One placed at forward end of stbd aft bunk. One placed at aft end of port aft cabin greatly improving ventilation in both spaces. 2008
Engine control panel moved from aft face of stbd cockpit locker to stbd aft cockpit adjacent to engine control lever and mounted in SSI recessed engine control cabinet with plexiglass cover. 2008
Navtec hydraulic backstay control panel moved from inboard face of stbd cockpit locker to aft space of locker to more easily accessed by mainsheet trimmer. 2008
Navimo plastic deck hatch installed in base of stbd cockpit locker. Provides access to stbd aft bunk storage area from locker as well as increased ventilation. Teak trim added in stbd aft bunk area 2008.
2 SSI recessed speaker (5”) and cupholder assemblies installed in aft cockpit port and stbd. 2008
B & G autopilot controller moved from port side of aft cockpit to stbd side adjacent to engine controls. 2008
Navimo plastic deck hatch (12” x 12” opening) mounted in port aft cockpit to provide access to storage area below cockpit. 2008
Navimo cockpit shower unit mounted aft of deck hatch in port aft cockpit. Hot and cold water pvc piping run to engine compartment. 2008
220 V shore power socket moved from stbd side of aft cockpit to port side aft of cockpit shower unit. New cabling run to electrical panel. 2008
Recessed SS brackets for semi-custom removable swimming ladder mounted at rear of port aft cockpit. 2009
All composite surfaces painted with Awlgrip white paint with flattener added. Wooden bunk supports recoated with spar varnish. Teak trim coated with satin varnish. 2008-2009
Teak and holly cabin soul stripped and recoated with 2 part super hard acrylic varnish. All recessed latches replaced. 2005
Custom 27 gal plastic holding tank and bracket installed portside under V berth. New vent hose run to existing topsides thru-hull fitting. 2008
Access port with recessed latch installed on stbd side to provide access to storage below V berth. 2008
New composite cabinetry with teak trim and recessed latches installed along port inner hull to provide added storage.
2 access ports with recessed latches installed to provide access to unused storage spaces. 2008
New Jabsco head installed with new hose, T and elbow fittings and SS hose clamps. Whale trash pump mounted under counter top to permit pumping of contents of holding tank to thru-hull fitting while at sea. New hose run to deck fitting for holding tank pump out. 2008
Sink relocated closer to the centerline to provide for more counter space. New sink drain fitting installed to allow for better drainage on port tack. 2008
New SSI storage bin with teak trimmed cover installed in countertop adjacent to stove. 2008
New custom made drawer with recessed latch installed between stove and relocated sink. 2008
CENTRAL CABIN AREA
Base for settee berths raised 6”. Composite panels installed below berths to provide for separated storage space aft of water bladder tanks. This allows for sitting on the settee without your knees in your chin as well as at the proper height to use the center table. It also provides added height so that the water bladder tanks can be fully filled. 2008
Settee backs/upper bunks raised 3”. Aluminum frames reconfigured and mounted in custom made aluminum brackets allowing the bunks to swivel into the raised position as well as being adjusted depending upon heel. Cushions recut to match adjusted frame. 2008
Delivery/Cruising Main-Set up with 4 wire Dutchman system
Best of Bunch
PBO Lightly used
1.5 oz AP
.7 oz Runner
Very stange looking sail-source?
Not sure if it works
Never used-sheets attached
Never used-sheets attached
No bag-never used-sheets attached
B&G Hercules 2000 System
Extended carbon wand for masthead unit
1 Analog apparent wind gauge in cockpit
1 790 controller/display at nav station
3 790 controller/displays in cockpit
4 2020 displays below boom with buttons near wheel to change display.
Hydra Pilot auto pilot with huge hydraulic ram and remote controller
Northstar 567 GPS with chartplotter-Chips for US EC. Unit is set up for AIS with antenna on aft pulpit. System requires black box interface which is on the boat but not wired in. Antenna is also wired as an emergency antenna VHF radio antenna should rig fall down (switch at nav station)
ICOM IC-M127 VHF marine transceiver. New antenna and cable at top of mast.
Sony Marine AM/FM radio with disc player and compatible with Ipod. Sirius radio antenna on aft pulpit. Needs black box wired into system to obtain Sirius connection. 2 speakers/cup holders in cockpit that drain into wheel well.
There are 2 cigarette type power plug ins in chart table for computers.
2 Harken 560 3 speed jib winches
4 Harken 44 ST winches, 2 halyards, 2 mainsheet
7 Lewmar Halyard stoppers
2 below deck spinnaker twing line controls
5 Lewmar hatches on cabin top-2 new 2005, 3 new 2008
6 Lewmar opening ports in cockpit-2 new 2008, 3 original
4 Blue Performance line pouches
4 Blue Performance winch handle pockets
12 PFDs in bags
Fortress anchor w/chain and 3 strand nylon rode
Lunch hook with 3 strand nylon rode
Flares, medical kit, horn, etc
Custom SS extended anchor roller, easily removable
Sleden aluminum sprit for cruising chute-easily removable
Cockpit shower, H&C
Semi-custom SS swim ladder-easily removable.
2 piston pumps used to step mast
Green cover for cabin table
Green cover for mast base above galley counter
Smaller diameter wheel w/spacer for cruising mode (allows for passage around the wheel)
Spare rod backstay with insulators for SSB radio
Aluminum bracket for Radar or Sat Phone dome-mounts in aft end of cockpit
Spare Halyard and running rigging
Main halyard new in 2011
New injectors in diesel 2009
New pressurized water system pump 2010
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.